What is TB6600 Hybrid Stepper Motor Driver (4.5A)
TB6600 Hybrid Stepper Motor Driver (4.5A) is a high-quality, high power and cost-effective drive. TB6600 is high current 4.5A, high voltage 45V, short circuit protection, and its performance is superior.10 to 45V are working voltages. Recommended DC voltages are 32V. In Hybrid Stepper Motor Driver high-speed optical coupling 6N137, which ensures high speed without losing a step. TB6600 use new high-current, high-voltage. TB6600 is a new original chip, it has low-pressure shut-off, overheating parking and over-current protection circuit =, short circuit protection and increased compared to TB6560. TB6600 maximum rated output reaches to 4.5A. 42,57,86, two-phase/four-phase/ four-wire/ six-wire stepper motor use for less than 4.2 A. It has an automatic semi-flow feature. It is subdivided into full step, half step, 1/4-step, step 1/8, 1/16-step, up to 16 segments. Width, Length, and hight of Hybrid Stepper Motor Driver (4.5A) are 82* 50 * 35.
Specs of TB6600 Hybrid Stepper Motor Driver (4.5A):
- The output current is infinitely adjustable to meet your demand for a variety of applications.
- Hybrid Stepper Motor Driver (4.5A) output current is infinitely adjustable to set the current for a variety of applications.
- it has an automatic semi-flow feature. and it also has a semi-automatic flow switch, which makes it easy to use.
- TB6600 using high-speed optical coupling 6N137 ensure high speed without losing a step.
- if you have back panel printed it means you have broken setup instructions.
- TB6600 is used to increase the heat sink, it is good for heat dissipation.
- Output short-circuits protection, the use of mind.
- Using common anode input mode, there are two input terminals, wiring more convenient.